Halden House plans
Pisgah, exterior rendering

Collection · North Carolina · Mountain Modern

Pisgah

Two shed roofs that open toward the Blue Ridge

2,375Heated sq ft
3,731Total sq ft
3Bedrooms
2.5Baths
2Stories
79′ × 28′Width × depth

The house

  1. Walkout lower level for a 10-ft fall lot
  2. Vaulted great room with a 24-ft glass wall and clerestory
  3. Main-floor primary suite
  4. Stone base, cedar and board-and-batten, standing-seam roofs
  5. Freestanding deck with cable guards and covered outdoor room

Renderings

Renderings show the design intent. Finishes, landscaping and furniture are illustrative.

Floor plans

plan l0Click to enlarge
plan l1Click to enlarge

Specifications

Heated area2,375 sq ft
Total under roof3,731 sq ft
Footprint79′-0″ wide × 28′-0″ deep
Garage2-car front-load (24' x 24')
FoundationWalkout basement (partly finished)
RoofStanding-seam metal shed roofs, 3:12 / 4:12
Climate zone4A
Wind / seismicVult 115 mph + topographic factor on ridges; SDC B-C

What's included

Included · instant download

PDF plan set

14 large-format sheets, print-ready, licensed to build this house once. Download it right after payment.

On request

CAD files

Editable drawings for the local professional adapting the set to your lot.

Quoted

Modifications

Flip it, add a room, change the garage or the foundation. Quoted before we draw.

  1. 01Cover sheet with renderings and project data
  2. 02Dimensioned floor plans for every level
  3. 03Four exterior elevations
  4. 04Building section through the main rooms
  5. 05Roof plan with pitches and drainage
  6. 06Foundation plan (concept, for local engineering)
  7. 07Door and window schedules
  8. 08Code summary for the plan's state

Code basis · North Carolina

This plan was drawn to:

  • 2018 NC Residential Code (in force)
  • 2024 NC Residential Code (adopted, pending)
  • 2018 NC Energy Conservation Code (Ch. 11)

North Carolina enforces a statewide North Carolina Residential Code, based on the IRC with state-specific changes. Wind zones near the coast are set by county.

Before you build. Halden plans are design documents. Depending on where you build, your jurisdiction may require structural design, energy compliance, a site plan, or a seal from a design professional or engineer licensed in your state. A local professional should review and adapt the set to your lot, soils and adopted code. We don't guarantee compliance with local zoning, covenants or setbacks.

Questions or modifications

Questions about Pisgah?

Ask about your lot, CAD files or changes to the plan. We reply within one business day, and quote any modification before we draw.